{"title":"Accessories","description":"\u003cp\u003eShop longboard accessories including bushings, bearings, grip tape, and drop kits. Everything you need to tune, maintain, and upgrade your setup.\u003c\/p\u003e","products":[{"product_id":"longboard-bushing-set-double-barrel-carving-formula","title":"Longboard Bushing Set — Double Barrel, Carving Formula","description":"\u003cp\u003eThe Double Barrel bushing set is designed for riders who want a firm, supportive feel through the full range of truck lean — particularly suited to aggressive carving and downhill riding where predictable rebound and lateral stability matter. The tall barrel shape on both the road-side and board-side positions provides a consistent lean curve that resists sudden breakaway and returns the truck to center with a measured, controlled rebound.\u003c\/p\u003e\u003cp\u003eThe cone and double barrel combination delivers a progressive lean feel through the turn. As you lean into a carve, the bushings compress gradually rather than reaching a hard stop, which gives you a readable sense of how much lean you have available before the truck reaches its travel limit. This behavior is useful for riders who are developing their carving technique and want feedback from the truck geometry rather than surprises.\u003c\/p\u003e\u003cp\u003eThe high-rebound urethane formula is chosen for its energy return characteristics — the bushing compresses under load and pushes back with a consistent force that helps the truck return to center after each turn. This reduces the amount of active correction needed to maintain a straight line between carves, which is particularly noticeable during longer pumping runs or extended downhill sections.\u003c\/p\u003e\u003cp\u003eFlat washers are included in the package. The washer interface affects how the bushing compresses — flat washers allow the urethane to deform more freely at the edges, which produces a slightly softer initial lean feel compared to cup washers. This setup is compatible with most standard reverse kingpin longboard trucks.\u003c\/p\u003e\u003cp\u003eAvailable in three durometers matched to rider weight ranges: Soft (Orange) for lighter riders or those who prefer a more responsive lean, Medium (Purple) for mid-range weights and a balanced feel, and Hard (Yellow) for heavier riders or those who prefer a firmer, more stable setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eShape: Tall barrel (road-side) + short barrel (board-side)\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\" (25.4 mm)\u003c\/li\u003e\n\u003cli\u003eHeight road-side: 0.56\" (14.2 mm)\u003c\/li\u003e\n\u003cli\u003eHeight board-side: 0.66\" (16.8 mm)\u003c\/li\u003e\n\u003cli\u003eFormula: High-rebound urethane\u003c\/li\u003e\n\u003cli\u003eDurometer: Soft (Orange) \/ Medium (Purple) \/ Hard (Yellow)\u003c\/li\u003e\n\u003cli\u003eWashers: Flat steel, included\u003c\/li\u003e\n\u003cli\u003eAge Group: Adult\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWeight Recommendations:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOrange \/ Soft: 75–200+ lb (34–90+ kg)\u003c\/li\u003e\n\u003cli\u003ePurple \/ Medium: 150–250+ lb (68–113+ kg)\u003c\/li\u003e\n\u003cli\u003eYellow \/ Hard: 175–275+ lb (79–125+ kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePackage includes two tall barrel bushings, two short barrel bushings, and four flat washers. Compatible with most standard reverse kingpin longboard trucks.\u003c\/p\u003e","brand":"Orangatang","offers":[{"title":"Orange \/ Adult","offer_id":43956660142145,"sku":"HFSS-BS-001-DB-ORG","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Purple \/ Adult","offer_id":43956660174913,"sku":"HFSS-BS-001-DB-PRP","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Adult","offer_id":43956660207681,"sku":"HFSS-BS-001-DB-YLW","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/2362\/8097\/files\/Orangatang-2023-Nipples-AllDuros.jpg?v=1779270622"},{"product_id":"longboard-bearings-set-8-pack-precision-skate-bearings","title":"Longboard Bearings Set — 8-Pack Precision Skate Bearings","description":"\u003cp\u003e\u003cem\u003eSold by HighFiveSkateShop — Authorized Retailer. Original product by Loaded Boards.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eThis 8-pack of precision longboard bearings is built for riders who want consistent roll performance and low maintenance across extended use. The set includes eight bearings — enough to fully equip a standard four-wheel longboard setup with two bearings per wheel.\u003c\/p\u003e\u003cp\u003eThe bearings use a standard 608 form factor (8mm bore, 22mm outer diameter, 7mm width), which fits the axle diameter on the majority of longboard and skateboard trucks on the market. No adapters or spacers are required for most standard setups.\u003c\/p\u003e\u003cp\u003eEach bearing uses a removable rubber shield on one side, which allows for cleaning and re-lubrication without disassembling the bearing completely. Riders who maintain their bearings regularly will find this design practical for extending service life, particularly in wet or dusty riding conditions where contamination is more likely.\u003c\/p\u003e\u003cp\u003eThe steel races and ball bearings are machined to ABEC-7 tolerances, which specifies the dimensional accuracy and running precision of the bearing. At this tolerance level, the bearings run smoothly at the speeds typical of longboard riding without generating excessive heat or noise from imprecision in the races.\u003c\/p\u003e\u003cp\u003eBearing spacers are included in the set. Spacers sit between the two bearings in each wheel and distribute axle load more evenly, which reduces lateral stress on the bearing races during hard turns and slides. Using spacers also makes wheel removal easier and reduces the risk of bearing damage when tightening axle nuts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eQuantity: 8 bearings (full set for one board)\u003c\/li\u003e\n\u003cli\u003eForm factor: 608 standard (8mm bore \/ 22mm OD \/ 7mm width)\u003c\/li\u003e\n\u003cli\u003eTolerance: ABEC-7\u003c\/li\u003e\n\u003cli\u003eShield: Removable rubber, one side\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel races and balls\u003c\/li\u003e\n\u003cli\u003eIncludes: Bearing spacers\u003c\/li\u003e\n\u003cli\u003eAge Group: Adult\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible with standard longboard and skateboard trucks with 8mm axles.\u003c\/p\u003e","brand":"Orangatang","offers":[{"title":"Silver Pink \/ Adult","offer_id":43959951786049,"sku":"HFSS-BR-001-ABEC7-SPK","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/2362\/8097\/files\/Jehu-V2-L_Bearing-36-hi_6002e7af-92dd-4b2b-98fe-cdee99b567cc.jpg?v=1779270623"},{"product_id":"longboard-drop-kit-low-ride-height-brackets-improved-stability","title":"Longboard Drop Kit — Low Ride Height Brackets for Improved Stability","description":"\u003cp\u003e\u003cem\u003eSold by HighFiveSkateShop — Authorized Retailer. Original product by Loaded Boards.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eThe longboard drop bracket kit lowers your board approximately 1.5\" below traditional top-mount height, shifting your center of gravity closer to the ground for a more planted, controlled ride feel. This geometry change is particularly noticeable at speed and during slides, where a lower stance reduces the leverage forces acting on your trucks through transitions.\u003c\/p\u003e\u003cp\u003eThe brackets are molded from fiber-reinforced automotive-grade resin — a material chosen for its resistance to flex, impact, and UV degradation. The resin construction absorbs vibration and maintains its shape under repeated load. Eight urethane O-ring dampeners are integrated into the mounting points, reducing road buzz transmitted from the trucks to the deck.\u003c\/p\u003e\u003cp\u003eThe bracket geometry accommodates wheels ranging from 75mm to 105mm in diameter, giving you flexibility to run a wide range of wheel setups without risking wheel bite. Compatibility extends to 150mm through 180mm reverse kingpin trucks, covering most standard longboard truck widths on the market.\u003c\/p\u003e\u003cp\u003eInstallation uses standard hardware and does not require drilling or modification to your deck. The brackets mount between the baseplate and the deck surface, replacing the standard riser pad position. Weight capacity is rated at 250 lb \/ 113 kg.\u003c\/p\u003e\u003cp\u003eThe compact footprint — 8.25\" x 3.25\" x 2.25\" per bracket — keeps the setup low-profile. At approximately 0.875 lb per set, the added weight is minimal relative to the ride geometry change they provide. Compatible with most standard longboard decks with standard truck mounting hole patterns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDrop height: ~1.5\" below top-mount\u003c\/li\u003e\n\u003cli\u003eMaterial: Fiber-reinforced automotive-grade resin\u003c\/li\u003e\n\u003cli\u003eDampeners: 8 urethane O-rings\u003c\/li\u003e\n\u003cli\u003eWheel compatibility: 75–105mm diameter\u003c\/li\u003e\n\u003cli\u003eTruck compatibility: 150–180mm reverse kingpin\u003c\/li\u003e\n\u003cli\u003eDimensions: 8.25\" x 3.25\" x 2.25\"\u003c\/li\u003e\n\u003cli\u003eWeight: ~0.875 lb per set\u003c\/li\u003e\n\u003cli\u003eWeight capacity: 250 lb \/ 113 kg\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eAge Group: Adult\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHardware included. Sold as a pair (two brackets).\u003c\/p\u003e","brand":"Loaded","offers":[{"title":"Black \/ Adult","offer_id":43959950737473,"sku":"HFSS-HW-001-DRPKT-BLK","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/2362\/8097\/files\/Loaded-Zee-Bracket-hero-2048p_49e2fe40-1b5a-45dc-811e-bd7aa4716c23.jpg?v=1779270625"},{"product_id":"easy-application-replacement-grip-tape-set","title":"Easy Application Replacement Grip Tape Set","description":"\u003cp\u003eThis replacement grip tape set is designed for longboard decks that use separate kick and platform sections rather than a single full-length sheet. The dual-density grit pattern addresses a specific problem with standard single-grit grip tape: the same grit that provides control on the kick zones can make foot repositioning during carving and dancing unnecessarily difficult on the standing platform.\u003c\/p\u003e\u003cp\u003eThe center sections use 70-grit abrasive, which provides enough texture to keep your feet planted during normal riding while allowing you to shift your stance smoothly when the movement requires it. The nose and tail kick sections use 50-grit abrasive, which is coarser and provides the grip needed to execute kick-based tricks, pop the tail, or maintain foot contact during aggressive maneuvers where the board is moving under your feet.\u003c\/p\u003e\u003cp\u003eEach piece is pre-cut to fit standard longboard kick and platform dimensions, reducing the trimming and fitting work required during installation. The adhesive backing is designed for a single clean application — position the piece, press from the center outward to eliminate air bubbles, and trim any overhang along the deck edge with a razor blade. The adhesive bonds firmly to sealed wood surfaces and does not require additional adhesive or heat activation.\u003c\/p\u003e\u003cp\u003eThe set includes four pieces total: two center platform sections and two kick sections, providing enough material to re-grip a complete longboard deck. This configuration also allows you to replace only the kick sections or only the platform sections if one area wears out faster than the other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCenter grit: 70-grit (platform sections)\u003c\/li\u003e\n\u003cli\u003eKick grit: 50-grit (nose and tail sections)\u003c\/li\u003e\n\u003cli\u003ePieces included: 4 (2 center + 2 kick)\u003c\/li\u003e\n\u003cli\u003eApplication: Peel-and-stick adhesive backing\u003c\/li\u003e\n\u003cli\u003eCompatible with: Standard longboard decks\u003c\/li\u003e\n\u003cli\u003eAge Group: Adult\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold as a set of four pieces. Razor blade for trimming not included.\u003c\/p\u003e","brand":"HighFiveSkateShop","offers":[{"title":"Grey \/ Adult","offer_id":43959950311489,"sku":"HFSS-HW-002-GRPTPE-GRY","price":16.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/2362\/8097\/files\/TTG2-Tan-Tien-Prism-griptape.png?v=1779270626"},{"product_id":"longboard-bushing-set-dual-profile-insert-barrel-gumdrop","title":"Longboard Bushing Set — Dual Profile, Insert Barrel and Gumdrop","description":"\u003cp\u003eThe dual-profile bushing set combines an insert barrel on the board-side with a gumdrop on the road-side — a shape pairing that produces a turning feel distinct from standard barrel or cone setups. The insert barrel features a small step that fills the gap around the kingpin, which reduces lateral play in the truck pivot and keeps the bushing seated consistently under load. The gumdrop shape on the road-side provides a smooth, gradual transition between the barrel and cone feel, giving the truck a lean curve that changes character as you push deeper into the turn.\u003c\/p\u003e\u003cp\u003eThe high-rebound urethane formula returns the truck to center with a measured, consistent force after each turn. This rebound behavior is noticeable during pumping and carving, where the truck’s return speed affects how quickly you can initiate the next turn. The formula is tuned to provide rebound without feeling overly springy or unpredictable at the end of the lean range.\u003c\/p\u003e\u003cp\u003eThe rounded edge on the gumdrop improves the interface between the bushing and the washer, which reduces friction at the contact point and allows the bushing to compress and rebound more freely. This detail affects the feel of the truck at low lean angles, where the washer-bushing interface has the most influence on initial turn response.\u003c\/p\u003e\u003cp\u003eCup washers are included on both sides. The cup washer geometry constrains the bushing at the outer edge, which produces a firmer initial lean feel compared to flat washers and limits how far the urethane can deform outward under load. This setup is suited to riders who want a more defined lean curve with a noticeable increase in resistance as the truck approaches its travel limit.\u003c\/p\u003e\u003cp\u003eAvailable in two durometers matched to rider weight: Soft (Orange) for lighter riders or those who prefer a more responsive initial lean, and Medium (Purple) for mid-range weights and a firmer, more controlled feel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRoad-side shape: Gumdrop\u003c\/li\u003e\n\u003cli\u003eBoard-side shape: Insert barrel\u003c\/li\u003e\n\u003cli\u003eDiameter: 0.95\" (24.1 mm)\u003c\/li\u003e\n\u003cli\u003eHeight gumdrop: 0.64\" (16.3 mm)\u003c\/li\u003e\n\u003cli\u003eHeight insert barrel: 0.665\" (16.9 mm)\u003c\/li\u003e\n\u003cli\u003eFormula: High-rebound urethane\u003c\/li\u003e\n\u003cli\u003eDurometer: Soft (Orange) \/ Medium (Purple)\u003c\/li\u003e\n\u003cli\u003eWashers: Cup washers included\u003c\/li\u003e\n\u003cli\u003eAge Group: Adult\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWeight Recommendations:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOrange \/ Soft: 65–190+ lb (29–86+ kg)\u003c\/li\u003e\n\u003cli\u003ePurple \/ Medium: 130–230+ lb (59–104+ kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePackage includes two insert barrel bushings, two gumdrop bushings, two large cup washers, and two small cup washers.\u003c\/p\u003e","brand":"Orangatang","offers":[{"title":"Orange \/ Adult","offer_id":43956660338753,"sku":"HFSS-BS-002-DP-ORG","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Purple \/ Adult","offer_id":43956660371521,"sku":"HFSS-BS-002-DP-PRP","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0727\/2362\/8097\/files\/Orangatang-2023-Knuckles-AllDuros.jpg?v=1779270627"}],"url":"https:\/\/highfiveskateshop.com\/collections\/accessories.oembed","provider":"HighFiveSkateShop","version":"1.0","type":"link"}